Honeywell 500, 18 Purpose, User Codes, Pin Warning, Max Users Pre V4 Only, Manager Code, Galaxy

Codes￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿(User￿Level 6)

			Purpose
			The Codes menu option enables the managers, (user level 6), to allocate
		￿	PINs and related information to users. The codes option is divided into
			three sub–menus:
			1. User Codes
		￿￿
			Sub divided into nine menus (depending on panel used and whether
￿￿￿￿￿￿￿￿￿￿￿￿￿
			the group and MAX Mode options are enabled) that determine all
			of the access information for users with Personal Identification
		￿￿￿	Numbers (PINs). This menu also assigns MAX details to user
			numbers.
￿￿￿￿￿￿￿￿￿￿￿￿￿
			2. Pin Warning
			Available only on the Galaxy 128, 500, 504 and 512. This option
		￿￿
			determines the warning period given to users prior to the
			programmed Pin Change date.
	￿￿￿￿￿￿￿!￿￿"￿#
			Note: The valid period for Pin Change codes is programmed by
			the installation engineer.
￿￿		￿￿
			3. Max Users (Pre V4 Only)
			This option is only available if the MAX mode is enabled. The
		￿￿￿￿%￿￿￿￿￿	option is subdivided into two menus that assign the MAX card to
$			users who do not have a PIN assigned.
			Manager Code
			The manager code is authorised to:
			• Program the USER CODES option for each of the user codes.
			• Allocate other codes to user level 6.
			• Modify the manager PIN (the manager PIN cannot be deleted)
			• Assign the MAX features to the code.
			The manager code defaults to group choice when groups are ena-
			bled. The manager is able to toggle the group choice option on and
			off (using the * key) as required.
			Galaxy 8 & 18
			The manager code defaults to accessing the quick menu.
			Note:	The MAX is the Proximity Access Reader which can be
				connected to the Galaxy system. This also refers to the
				MicroMAX, the enhanced version of the MAX.

16