Honeywell 18, 500, 504, 512, 60, 128 manual Display Zones User Level 4 and Above

Chime￿￿￿￿￿￿￿￿￿￿￿(User￿￿￿￿￿￿￿￿￿Level 3 and Above)

						Purpose
						The Chime mode is switched on and off by this option. When the
						Chime mode is on, any zones that have been programmed by the
						engineer for chime will activate momentarily when opened.
						tion.
￿		￿￿￿￿￿￿
	￿￿					Note:	Your system may not require any zones of this type.
￿￿￿￿￿￿￿￿￿￿￿￿￿						Selecting Chime
						Enter the QUICK MENU. Press key 2 followed by the ent key. The
						display shows the ON/OFF status of the Chime mode. Press the >A key
						to toggle between the states and press the ent key to accept the selec-
￿￿￿￿￿						Note:	Keys 1 AND 0 can also be used to select ON and OFF
							respectively.
	￿￿					Chime In Operation
￿				￿￿￿￿
						When switched ON, the Chime mode remains active until switched
￿￿￿￿￿
						OFF again. Zones that have been programmed with the chime attribute
						by the engineer continue to chime when they are activated.
	￿￿￿			￿￿￿		Purpose
		￿￿￿				Note:	The Chime mode is suspended while the system is set or
￿￿￿￿￿					￿￿￿￿￿￿	current status.
							during an alarm.
Display Zones (User Level 4 and Above)
		￿				This menu option provides the user with a method of accessing the
						Display Zones mode and checking each zone for its description and
						Selecting Display Zones
			￿￿
						Enter the QUICK MENU. Press key 3 followed by the ent key. Details of
￿￿￿￿￿￿￿￿￿￿￿￿￿
						500).
￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿						the first zone (1001) are displayed.
						Address
						The zone address provides a unique four digit address number used for
		￿￿￿
						identification and selection, e.g. 1026 - line 1, RIO 02, zone 6 (Galaxy

Function

The zone function is displayed and identifies the operation of the zone, e.g. INTRUDER, FIRE.

11