Honeywell CT3650 manual Copy a Day, Clear a Program Period, Press, until the desired day displays

Copy a Day

Your thermostat can copy program settings from one day to another.

❑ Press	Wake , Leave , Return or Sleep to enter programming mode.
❑ Press	Day	until the display shows the day you want to copy.
❑ Press	Copy	. The display shows.
❑ Press	Day	until the display shows the day you want to copy to.

❑ Press Copy to accept the change.

❑Repeat these steps for each day you want to copy.

NOTE: donE appears for two seconds and then the normal program display appears.

Mon

M13327

Mon Wed

M13328

M13329

Clear a Program Period

NOTE:	Wake cannot be cleared.
❑ Press	Leave	,	Return	, or		Sleep	for the program period you want to clear.
❑ Press	Day		until the desired day displays.
❑ Press and hold the				Leave	,	Return	, or	Sleep	for approximately 3 seconds until the time and temperature clear.

❑Repeat the above steps for each period to be cleared.

❑	Press	Run
		Program .

69-1285—2 16