Program the First Day
Start by programming the wake time and temperature for one day.
❑ Press and release | Wake | . | ||
| ||||
❑ Press | Day | until the desired day displays. (Mon, Tue, Wed, Thu, Fri, Sat, Sun) |
❑Press time or until the desired time shows in the display. NOTE: Program times are in 15 minute intervals. For example, 8:00, 8:15, 8:30.
❑Press or until the desired wake temperature displays.
The setpoint temperature range is 40°F to 90°F (4.5°C to 32°C) for heating and 45°F to 99°F (7°C to 37°C) for cooling.
❑ Press | Heat/Cool | to switch between setpoints. |
Settings |
NOTE: Program times are the same for heating and cooling.
❑Press or until the display shows the desired temperature setpoint.
NOTE: You can program the fan to On or Auto for each program period. Setting Fan to On runs the system fan continuously in the program periods.
❑ | Press | Fan |
| until the fan is at the desired setting (On or Auto). | |||
|
| ||||||
❑ | Press | Leave | , | Return | or | Sleep | and repeat these steps for each program period. The first day is now programmed. |
|
|
|
❑Repeat each step in Program the First Day for the rest of the week.
NOTE: After the first day is programmed, you can copy that day to any other day using procedure in Copy a Day.
❑ | Press | Run | when the entire week is programmed. |
Program |
15 |