Manuals / Honeywell / Household Appliance / Thermostat

Honeywell manual Table of Contents, Owner’S Guide, Honeywell CT3650, Programmable Thermostat

Models: CT3650

1 24

Download 24 pages 31.94 Kb

Page 1

Image 1

Honeywell CT3650

PROGRAMMABLE THERMOSTAT

OWNER’S GUIDE

Seven Day

Programmable Heat and/or Cool

Low Voltage (20 to 30 Vac) Thermostat and Wallplate

Model CT3650

Para pedir estas instrucciones en español, llame al 1-800-468-1502.

Pour obtenir ce ode demploi en français, composer le 1-800-468-1502.

Table of Contents
Step 1. Prepare for Installation	5
Step 2. Remove Old Thermostat	6
Step 3. Mount thermostat Wallplate	7
Step 4. Wire Wallplate Terminals	8
Step 5. Install the Batteries	9
Step 6. Mount the Thermostat	10
Step 7. Customize Your Thermostat	11
Step 8. Set the Clock	13
Step 9. Programming	13
Step 10. Operating Your Thermostat	17
Step 11. Set the Fan and System Key	18
If You Have a Problem	19
Smart Response™ Technology	20
Wiring Diagrams	21
® U.S. Registered Trademark
Copyright © 2001 Honeywell •	•All Rights Reserved
	69- 1285- 2

Page 1

Image 1

Contents

OWNER’S GUIDE Table of ContentsHoneywell CT3650 PROGRAMMABLE THERMOSTATMERCURY NOTICE Total comfort temperature management with Smart Response TechnologyTIME /TIME 69-1285-2Set Day/Time Temporary Setting In RecoveryHold for DaysPackage Contents STEP 1. PREPARE FOR INSTALLATIONTools Required Replacing a Thermostat that has Six or More Wires Special InstallationsReplacing a Thermostat that has Three Wires STEP 2. REMOVE OLD THERMOSTATSTEP 3. MOUNT THERMOSTAT WALLPLATE STEP 4. WIRE WALLPLATE TERMINALS Table 2. Terminal Designations on Old and New Thermostats STEP 5. INSTALL THE BATTERIESConnect To DescriptionA. ENGAGE TABS AT TOP OF THERMOSTAT AND WALLPLATE STEP 6. MOUNT THE THERMOSTATB. PRESS LOWER EDGE OF CASE TO LATCH System Type Feature Number Fan Operation Feature NumberSTEP 7. CUSTOMIZE YOUR THERMOSTAT Time Format Feature Number Smart Response Technology Feature Numberto move to next feature or Press TimeSTEP 8. SET THE CLOCK Factory Set Function Feature NumberSTEP 9. PROGRAMMING Set Current Day and TimeTable 3. Personal Programming Table when the entire week is programmed Program the First DayPress Clear a Program Period Copy a Dayfor approximately 3 seconds until the time and temperature clear PressSTEP 10. OPERATING YOUR THERMOSTAT Change Temperature Setting Indefinitely HoldDaylight Savings Time Key Set the Fan Key STEP 11. SET THE FAN AND SYSTEM KEYSet the System Key Table 4. Solution Guide IF YOU HAVE A PROBLEMThen… Toll-Free Customer Assistance SMART RESPONSE TECHNOLOGY2-WIRE HEAT-ONLY WIRING DIAGRAMS3-WIRE HEAT ONLY WITH FAN JUMPER INTACT 4-WIRE SINGLE-STAGE HEAT PUMP JUMPER INTACT5-WIRE HEAT/COOL WITH DAMPER 5-WIRE HEAT/COOLJUMPER REMOVED JUMPER INTACTLimited One-Year Warranty Home and Building Control Home and Building ControlHoneywell 1985 Douglas Drive North