Honeywell CT3650 manual Operating Your Thermostat, Change Temperature Setting Indefinitely Hold

STEP 10. OPERATING YOUR THERMOSTAT

Change Temperature Setting Until the Next Program Period (Temporary Change)

❑Press or until the screen shows the desired temperature setting.

NOTE: The temporary temperature setting is displayed for about 3 seconds and then the room temperature is dis- played. Temporary appears in the display. The setting cancels when the next program period starts or when

Run

you press Program .

Change Temperature Setting Indefinitely (Hold)

❑	Press	System	until “Heat” or “Cool” is displayed.
❑ Press Hold Temp			then	or	to change your setting if desired. (The display changes from showing the setpoint
	temperature to room temperature after approximately three seconds).
❑					Run
	To cancel “Hold” press Program .

Change the Temperature Setting Until a Designated Day and Period (Vacation Hold)

❑Press Hold Temp twice.

❑Press or until the display shows the desired temperature setpoint.

❑Press Time until the desired number of days that you will be away (1 through 255) is displayed.

❑ Press Wake , Leave , Return or Sleep to select the program period when you want the program to restart.

NOTE: If the Vacation Hold needs to be cancelled before the designated time, press program.

Run	to return to the
Program

Daylight Savings Time Key

This feature allows you to switch between standard time and daylight savings time.

Daylight

❑ Press Time

during fall to set the time back one hour.
17	69-1285—2