8.6 PRESHOTS
When using Maxpro mode, there are several PreShots (views or presets) reserved for controlling and programming the scan. Refer to Table 1 for a listing of the preprogrammed PreShots and their functions.
Program PreShots as described Section 7.7 and send the KD6i/HD6i to PreShots as described in Section 7.8.
The PreShots reserved for scan setup, programming, and control functions cannot be programmed and cannot be included in VectorScans.
| Table 1: |
| Preprogrammed Preshots |
| KD6/HD6 (Maxpro Mode) |
|
|
PreShot 80 | Run PTZ Tour 1 |
PreShot 81 | Run PTZ Tour 2 |
PreShot 82 | Run PTZ Tour 3 |
PreShot 83 | Program PTZ Tour 1 |
PreShot 84 | Program PTZ Tour 2 |
PreShot 85 | Program PTZ Tour 3 |
PreShot 86 | Terminate PTZ Programming Mode |
PreShot 87 | Start VectorScan 1 |
PreShot 88 | Start VectorScan 2 |
PreShot 89 | Start VectorScan 3 |
PreShot 90 | Setup the Scan and Camera (OSD Menus) |
PreShot 91 | Toggles the error table display |
PreShot 92 | Toggles auto exposure ON and OFF. (Factory default is ON.) |
PreShot 93 | Toggles backlight compensation ON and OFF. The unit must be in auto |
| exposure mode for backlight compensation to function. |
PreShot 94 | Toggles between standard operation and NightShot mode. (Camera |
| models |
PreShot 95 | Toggles between freeze and unfreeze video |
PreShot 96 | Invokes the Flashback Function |
PreShot 97 | Reserved |
PreShot 98 | Camera/Scan Reset |
PreShot 99 | Reserved |
Rev. 1.01 | 42 | 900.0570 |
|
|