APPENDIX C:
VCL (ORBITER/RAPIDDOME) DATA INPUT
The following Honeywell VCL (Orbiter/RapidDome) commands can be input into the keyboard using an RS485 connection to the KBD port.
UP | UP STOP |
DOWN | DOWN STOP |
LEFT | LEFT STOP |
RIGHT | RIGHT STOP |
ZOOM IN | ZOOM IN STOP |
ZOOM OUT | ZOOM OUT STOP |
FOCUS NEAR | FOCUS NEAR STOP |
FOCUS FAR | FOCUS FAR STOP |
AUTO FOCUS ON | AUTO FOCUS OFF |
IRIS OPEN | IRIS OPEN STOP |
IRIS CLOSE | IRIS CLOSE STOP |
AUTO IRIS ON | AUTO IRIS OFF |
START RESUME TOUR OR AUTOPAN | TOUR OFF |
SEEK PRESET | PROGRAM PRESET |
WASH ON | WASH OFF |
WIPE ON | WIPE OFF |
LAMPS ON | LAMPS OFF |
AUX ON | AUX OFF |
NUMBERED AUX ON | NUMBERED AUX OFF |
CAMERA NUMBERED AUX ON | CAMERA NUMBERED AUX OFF |
TOGGLE MONO / COLOUR | AUTOMATIC MONO / COLOUR |
DEFINE TOUR START | DEFINE TOUR STOP |
DEFINE SECTOR RHS | DEFINE SECTOR LHS |
ALARM MODE ON | ALARM MODE OFF |
PRIVACY ZONE SETUP | CAMERA SETUP |
TOUR POINT DATA | TURN 180 DEGREES |
CAMERA AUTO ALARM SEEK TIME | DEFINE HOME FUNCTION |
REMOTE RESET | SEEK ABSOLUTE POSITION |
KD6_SEND_CHAR | KD6_COMMAND |
The following commands are ignored: |
|
STATUS REQUEST |
|
CAMERA ALARM STATUS REQUEST |
|
ZONE STATUS REQUEST |
|
ABSOLUTE POSITION REQUEST |
|
ALARM STATUS REQUEST |
|
GLOBAL COMMAND |
|
PATROL |
|
RELEASE RS485 BUS |
|
Rev. 1.01 | 51 | 900.0570 |
|
|
