3.Push the black release latch on top of the carrier body (original carrier) or push the side release latch with the word OPEN printed beside it (new carrier) to slide the top cover backwards until it is completely removed.
New HD Carrier | Original HD Carrier |
Release latch |
|
Release latch
4.Ensure that the hard drive is configured as Master. Refer to the documentation supplied with the hard drive for the jumper settings.
5.Plug the PC power cable and IDE ribbon cable into the hard drive cartridge.
New HD Carrier |
| Original HD Carrier |
PC power cable | IDE ribbon cable | PC power cable |
|
|
IDE ribbon cable
6.Position the hard drive cartridge into the carrier body. Secure the hard drive using the four
New HD Carrier | Original HD Carrier |
7.Slide the top cover back on the carrier body by sliding it forward. The silver tab (original carrier) or the side latch (new carrier) clicks over the black release latch to secure the cover in place.
New HD Carrier | Original HD Carrier |
Top cover
Top cover
Carrier body
Carrier body
Rev 1.00 | 5 | Document 900.0259 |
|
| 10/04 |