HRTL-One Digital Video Recorder User Guide

Press Menu to confirm your changes.

3.Press S or T to select the Record Quality field, then press Enter. Press S or T to choose from the following options:

See Table 3-2(NTSC) or Table 3-3(PAL) as a guide to determine the record duration vs. the quality selected.

Press Menu to confirm your changes.

4.Press S or T to select the Record Mode field, then press Enter. Press S or T to choose from the following options:

Fields, Frames

Press Menu to confirm your changes.

5.Press Menu to exit this screen and confirm the current operations.

6.If you have completed all your system configuration changes, press Menu again to exit and close menu setup.

Alarm Mode Setup

Use the Alarm screen to set how the system responds to an alarm event (for example, video loss, power failure, full hard drive).

1.On the Main Menu screen, press S or T to select Alarm, then press Enter. The following screen appears:

Figure 3-8 Alarm Screen

(Menu)

 

(Alarm)

Timer

 

J Alarm Enable: Yes

Record

 

Alarm Duration: 1 MIN

J Alarm

 

 

 

Record IPS: 60

 

 

Remote

 

 

 

Quality: High

 

System

 

Record Mode: Frame

Event

 

 

2.Press S or T to select the Alarm Enable field, then press Enter. Press S or T to choose from the following options:

Yes = Turns on the alarm and activates a steady alarm LED on the front panel. When the HRTL-One detects an alarm condition, the appropriate LED on the front panel flashes to alert the user.

Rev 1.00

27

Document 900.0259

 

 

10/04