System Setup

 

 

Table 3-1

Front Panel Controls

 

 

 

Control

Function (cont’d)

 

 

 

 

 

7.

REC

Press to start recording.

 

 

 

 

8.

POWER

Press to power up the HRTL-One. Press again to power off the HRTL-One.

 

 

 

9.

REW

Press once to play video backward at high speed. Press again to adjust the speed (1, 2, 4, 8, 16, 32

 

(Left)

times, depending on the number of times you press this button).

 

 

10. FF

Press once to play video forward at high speed. Press again to adjust the speed (1, 2, 4, 8, 16, 32

 

(Right)

times, depending on the number of times you press this button).

 

 

11. PAUSE

Press to pause the video at the currently displayed image.

 

 

12. PLAY

Press to play recorded video.

 

 

13. LEDs

Under the following conditions, the red light is ON:

•HDD = The hard drive is activated.

•HDD FULL = The hard drive is full.

•ALARM = When alarm enable is set to Yes and an alarm is triggered, the LED flashes red.

•TIMER = When the recording timer is set for operation.

•PLAY = The HRTL-One is in Play mode.

•REC = The HRTL-One is in Record mode.

Recording Times

The record time depends on the record speed and record quality settings (see Recording Setup, page 26). Table 3-2provides typical NTSC recording times and Table 3-3provides typical PAL recording times for a 120 GB hard drive. Table 3-4provides typical NTSC recording times and Table 3-5provides typical PAL recording times for a 250 GB hard drive.

Rev 1.00

16

Document 900.0259

 

 

10/04