Honeywell HRTL-One Rear Panel Connections, Connection Description, Figure 2-6Rear Panel Connections, Table 2-2Rear Panel Connections to Peripheral Equipment

Installation

Rear Panel Connections

Figure 2-6shows the rear panel connections and Table 2-2describes the connections.

Figure 2-6 Rear Panel Connections

VIDEO IN

POWER ALARM

VIDEO OUT

Table 2-2 Rear Panel Connections to Peripheral EquipmentConnection Description

1.	Video In	Connect to video source (for example, a quad, multiplexer, or
		camera).
2.	Video Out	Connect to a monitor if there is no quad or multiplexer in your
		system (see Figure 2-4).
		Connect to the video input of a quad or multiplexer, as shown
		in Figure 2-5.
3.	External	•	RS-232 / RS-485 front panel command line interface
	I/O		Controlled remotely by an external device or control
			system (see Figure 2-4).
		•	Multiplexer synchronization
		•	Disk full indication
		•	Record enable/disable
		•	Video loss indication
		•	Alarm input/output
4.	Power	Connect to power cable.

Rev 1.00	10	Document 900.0259
		10/04