HRTL-One Digital Video Recorder User Guide

Remote Protocol Setup

You can control the HRTL-One remotely using commands specified in Table 3-6. On the Remote screen you configure:

•Remote protocol interface

•Transmission baudrate

•Remote protocol ID

1.On the Main Menu screen, press S or T to select Remote, then press Enter. The following screen appears:

Figure 3-9 Remote Screen

(Menu)

(Remote)

Timer

J Remote Mode: RS-232

Record

Baud Rate: 9600

Alarm

ID: 000

JRemote System Event

2.Press S or T to select the Remote Mode field, then press Enter. Press S or T to choose from the following options:

RS-232= RS-232 interface RS-485= RS-485 interface

Press Menu to confirm your changes.

3.Press S or T to select the Baud Rate field, then press Enter. Press S or T to choose from the following options:

115200, 57600, 19200, 9600, 4800, 3600, 2400, 1200 Press Menu to confirm your changes.

4.Press S or T to select the ID field, then press Enter.

Press S or T to set the numerical number and press W or X to move to the next digit (3 digits).

Press Menu to confirm your changes.

5.Press Menu to exit this screen and confirm the current operations.

6.If you have completed all your system configuration changes, press Menu again to exit and close menu setup.

Rev 1.00

29

Document 900.0259

 

 

10/04