Reconnect

Note: These options can still be checked or unchecked whether Bluetooth connection is enabled or disabled.

Options

Option

Function

 

 

Report when connection

This option is Enabled (checked) by default.

lost

There may be an audio or visual signal when a connection between a paired, active device is

 

lost.

 

A visual signal may be a dialog box placed on the display notifying the user the connection

 

between one (or all) of the paired Bluetooth devices has stopped. Tap the OK button to remove

 

the dialog box from the screen.

 

 

Report when reconnected

This option is Disabled (unchecked) by default.

 

There may be an audio or visual signal when a connection between a paired, active device is

 

made.

 

A visual signal may be a dialog box placed on the display notifying the user the connection

 

between one (or all) of the paired Bluetooth devices has resumed. Tap the ok button to remove

 

the dialog box from the screen.

 

 

Report failure to recon-

This option is Enabled (checked) by default.

nect

The default time delay is 30 minutes. This value cannot be changed by the user.

 

There may be an audio or visual signal when a connection between a paired, active device

 

fails to re-connect. A visual signal may be a dialog box placed on the display notifying the user

 

the connection between one (or all) of the previously paired Bluetooth devices has failed.

 

Tap the X button or ok button to close the dialog box.

 

Possible reasons for failure to reconnect: Timeout expired without reconnecting; attempted to

 

pair with a device that is currently paired with another device; attempted to pair with a known

 

device that moved out of range or was turned off; attempted to pair with a known device but

 

the reason why reconnect failed is unknown.

 

 

Clear Pairing Table on

This option is Disabled (unchecked) by default.

Boot

When enabled (checked), all previous paired information is deleted upon any reboot sequence

 

and no devices are reconnected.

 

When enabled (checked) Auto Reconnect on Boot is automatically disabled (dimmed).

 

 

Auto Reconnect on Boot

This option is Enabled (checked) by default. All previously paired devices are reconnected

 

upon any reboot sequence.

 

When disabled (unchecked), no devices are reconnected upon any reboot sequence.

 

 

7 - 8