Honeywell MX7 Setting, Default, For MX7 Tecton with Hand Held Products Imager:, For MX7 Tecton with Symbol or Honeywell engine:

Data Options

Bar code manipulation parameter settings on this tab are applied to the incoming data resulting from successful bar code scans sent to the MX7 Tecton for processing.

Note: The Data Options tab contains only those options available for one type of decoding engine.

Setting	Default
Enable Code ID	None
Symbology Settings	All
Control Character Translate All	Disabled
Custom IDs	Name blank
HHP Properties (Hand Held Products)	Options Disabled:
	Centering
	DecodeMode
	LinearRange
	AimTimer
	LeaveLightsOn

The Data Options tab contains several options to control bar code processing. Options include:

•Defining custom Code IDs

•Disable processing of specified bar code symbologies

•Rejecting bar code data that is too short or too long

•Stripping characters including Code ID, leading or trailing characters and specified bar code data strings

•Replacing control characters

•Adding a prefix and a suffix

For MX7 Tecton with Symbol or Honeywell engine:

Data Collection Wedge can only enable or disable the processing of a bar code inside the Wedge software. Enabling or disabling a specific bar code symbology at the scanner/imager is done manually using the configuration bar codes in the Integrated Scanner Programming Guide.

For MX7 Tecton with Hand Held Products Imager:

Data Collection Wedge enables or disables the bar code at the imager as well as enabling or disabling the bar code processing in the Wedge software..

8 - 7