Removing the MX7 Tecton from a Powered Vehicle Cradle

1.Push the top of the Retainer up and back until the MX7 Tecton is released from the Retainer latches and the charging pocket swings forward.

2.Pull the MX7 Tecton up and out of the vehicle cradle pocket, disconnecting the MX7 Tecton from the charge/ communication port at the base of the docking bay. The Docked LED turns off.

Powered Vehicle Cradle Help

The following is intended as an aid in determining whether the MX7 Tecton or the vehicle mounted cradle may be malfunctioning.

Problem

Cause

Solution

 

 

 

MX7 Tecton docked in

MX7 Tecton not fully seated in cradle.

Reseat the MX7 Tecton fully into the docking bay.

cradle but cannot work

 

 

with accessory cables

There are foreign objects inside

Remove the foreign objects and reseat the MX7

connected to cradle.

docking bay or cable connectors

Tecton in the docking bay.

 

 

 

MX7 Tecton docked in

MX7 Tecton not fully docked.

Check the docking bay is clear of foreign objects

cradle but Docked LED

 

and reseat the MX7 Tecton fully into the docking

does not light up.

 

bay.

 

Power supply not connected.

Check that power is connected to the Power Port

 

 

at the rear of the cradle.

 

 

 

14 - 36