Using the
n1 OFF Key
DISARMING THE SYSTEM
AND SILENCING ALARMS
The OFF key is used to disarm the system and to silence alarm and trouble sounds.
To Disarm the System
Enter your securitv code and Dress the OFF kev. The “Ready” message will be displayed, and the console will emit a single tone to confirm that the system is disarmed.
To Silence a Burglary Alarm
SEE IMPORTANT NOTE AT LEFT!
Enter your security code and mess the OFF kev to silence the alarm (or warning tones of a Memory of Alarm). Note the zone in alarm on the console display, and make that zone intact (close door, window, etc.). Now enter the security code plus OFF sequence again to clear the console’s Memory of Alarm display. If the display will not clear and does not provide a “Ready” message, notify the alarm agency.
To Silence a Fire Alarm simdv p ress the OFF kev (the security code is not needed to silence FIRE alarms). TO then clear the console’s Memory of Alarm display, enter your security code and press the OFF key.
See page 29 for additional fire alarm information.
See the SUMMARY OF AUDIBLE/VISUAL NOTIFICATION section forinformation which will help you to distinguish between FIRE(lnterrupted/pulsed) and BURGLARY (Continuous/Steady) alarm sounds.