QUICK GUIDE TO ALARM SYSTEM FUNCTIONS
| .. | . | ||||
Fll | Nf7T10N |
| iPRr’)CFr)ll | RF | ||
Check |
| Zones | Press READY key. | |||
Arm | System | Enter code. Press arming key desired: | ||||
|
|
|
|
| (AWAY, STAY, INSTANT, MAXIMUM) | |
Quick |
| Arm |
| Press #. Press arming key desired: | ||
(if | programmed) | (AWAY, STAY, INSTANT, MAXIMUM) | ||||
Bypass | Zone(s) | Enter code. Press BYPASS key, | ||||
|
|
|
|
| Enter zone number(s) to be bypassed | |
|
|
|
|
| (use | |
Quick |
| Bypass | Enter code, Press BYPASS key. | |||
(if | programmed) |
|
| |||
Silence | Sounders |
|
| |||
| Burglary: | Enter code. Press OFF key. | ||||
|
|
| Fire: | Press OFF key. | ||
| “Check”: | Press any key. | ||||
Disarm | System | Enter code, Press OFF key. | ||||
Clear |
| Alarm | After disarming, enter code again. | |||
Memory |
| Press OFF key again, | ||||
Duress | (if active | Arm or disarm “normally”, | ||||
and connected to but with 4th digit of code increased by “1”. | ||||||
central | station) |
|
| |||
Panic |
| Alarms | Press key [A], [B], or [C] for at least 2 sec., or | |||
(aa | programmed) | (if no A, B, or C on your console) | ||||
|
|
|
|
| press keys [l]&[#+], or [4$]&[#], or [3]&[#J, | |
|
|
|
|
| both at same time. | |
Chime | Mode | To turn ON or OFF: Enter code. Press CHIME key. | ||||
Test | Mode |
| To Ium | 00/: Enter code, Press TEST key. | ||
|
|
|
|
| To turn OFF: Enter code, Press OFF key. | |
Phone | Access | Consult Phone Access User’s Guide that | ||||
(Voice |
| Module) | accompanies Voice Module. | |||
if | app Iicable |
|
| |||
. . ....... .. | ,- | I |
[ ~t7MilfulFNTC |
|
To view faulted zones when system @ ready.
Arms system in mode selected.
Arms system in mode selected, quickly and without use of code.
Bypassed zones are unprotected and will not cause an alarm if violated.
Bypasses all faulted zones automatically.
Also disarms system. Memory of alarm remains until cleared. Memory of Alarm remains until cleared.
Determine cause. See Page 26.
Also silences sounders. Memory of alarm remains until cleared. Console will beep rapidly upon entry if alarm has occurred. Alarm display will remain upon disarming until cleared.
Performs desired action and sends silent alarm to central station.
See Page 22 for functions programmed for your system.
Console will sound if doors or windows are violated while system is disarmed and chime mode is ON.
Tests alarm sounder and allows sensors to be tested.
Permits system access remotely, via