Exit Alarm WarningDisplays and Sounds

EXUT ALARMS

Your system may support and have been programmed for this feature.

When arming, if an exit or interior zone contains a fault during closing at the time the exjt cfe/ay ends, the alarm sounder and console sound continuously to alert you that an unwanted alarm can be prevented if you take action:

●If you disarm the system during the entry delay period that wili immediately Mow, the sound stops. The console displays “CANCELLED ALARM “or“CA” as well as a zone indication. No messaae is transmitted to the central station.

●If the system k NOT disarmed during the immediately following entry delay period, ‘the sounds continue until the-system is disarmed (or alarm sounder timeout occurs). The console displays “EXITALARM” or “EA”as well as a zone indication. An “exitalarm” messaae will be sent to the central station.

h/ote: The latter “EXITALARM” conditions also result if an alarm from an exit or interior zone occurs within two minutes after the end of an exit delay.

In any of the above cases, a second OFF sequence (security code + OFF key) will clear the console display.

CHIME MODE

Your system can be set to alert you to the opening of a door or window while it is disarmed by using CHIME mode. When activated, three tones will sound at the Console whenever a door or window is opened. Pressing the READY key will display the open protection points.

To turn Chime Mode on, enter the security code and press the CHIME key. The CHIME message will appear.

To turn Chime Mode off, enter the security code and press the CHIME key again. The CHIME message will disappear.

-21-

.

.

.

. . ..