TO REPLACE THROW-
AWAY BAG
Tip cleaner over, resting handle on the floor. @pen bag cover of cleaner by turning latch in either direction. Lift bag cover . Hold throw-away bag by cardboard cover, twist out- ward, and remove. Discard used bag.
To attach new throw-away bag, hold bag with cardboard collar down and with arrows pointing toward front of cleaner . Push hole in cardboard firmly over tube, twisting until bag is secure. Be sure that throw-away bag is not extending outside of cover and that cover is in proper position on the gasket before latching.
WHERE TO BUY BAGS
Keep a supply of Throw-Away Bags on hand. They may be purchased at your local Authorized Hoover Dealer (listed in in the Yellow Pages of your Telephone Directory under “Vac- uum Cleaners” - Hoover) or from Hoover Factory Branch Service Stations listed on the service page of this book.
WHEN ORDERING THROW-AWAY BAGS, BE SURE TO MEN- TION THE MODEL OF YOUR CLEANER.
THE BELT
WHEN TO REPLACE THE BELT
Remove bottom plate from cleaner (see Fig, 1) and check from time to time to be sure the belt is in good condition. If it is stretched or cut, it should be replaced.
