WHAT YOU SHOULD KNOW ABOUT THE BELT
The belt of your Hoover cleaner controls the speed of the agitator and is important for the efficient operation of your cleaner. Be- cause of this, when buying a new belt, you should always insist on a genuine Hoover belt. Some other belts on the market, not manufactured under Hoover design and quality controls, do not operate the agitator correctly and create undue stress which will damage your Hoover cleaner. The use of other than genuine Hoover belts voids your guarantee. Genuine Hoover belts have the name HOOVER. printed on the belt.
THE BRUSHES
WHEN TO REPLACE BRUSHES
The brushes on your cleaner are made of quality nylon which will last approximately four times longer than horsehair. Check occasionally by laying a piece of cardboard across nozzle. If bristles do not touch the edge of cardboard, new brushes are needed. Always replace both brushes at the same time .
TO REPLACE BRUSHES
Remove the belt and agitator, following directions given on Pages 10 and 11.
I. Turn end plates in opposite di-
rections until
one plate comes off.
12
