How to attach tool

3-10

3.Remove recovery tank front panel (F) by sliding it straight up.

3-11

4.Replace panel with converter (G). Slide converter halfway down opening until it is firmly in place.

3-12

5.Before connecting tube (H) to cleaner, make sure black tabs are extended by pulling tan collar toward tube.

Open door on hood labeled “Stair/ upholstery Cleaning Connection”. Press round solution tube connector onto round projection inside door. Press con- nector collar down firmly to ensure that it is fully connected.

3-13

6.The tank replaces in a hinge-like manner. Position front of lid under tabs

(I) on front of tank. Rotate lid down onto tank.

Make sure lid is secure on all sides before cleaning.

For full suction, it is important that the recovery tank lid is properly secured before cleaning.

Reverse procedure to remove hose and solution tube.

Raise deep cleaner handle to upright position.

3-14

All tools connect to the hose in the same manner.

1.Attach tool to connector end of hose by sliding it onto connector until the tab

(J) locks it securely.

Using your thumb, push forward and up on the latch (K) to remove tool as shown.

Before using tool

It may be necessary to remove air from the system (“prime the pump”) so the clean solution will flow to the tool. Follow these steps:

1.Attach tool to hose and turn the deep cleaner ON.

2.Put the tool on a hard surface or against your hand to block off the suc- tion.

3.Wait a few seconds (can take up to

15seconds). Then squeeze the trigger and begin cleaning.

Follow the instructions on pages 14 and 15 for the appropriate cleaning task.

3-15

3-16

After using tool

1.Follow steps a and b for “After clean- ing” on page 11.

2.Rinse tool and hose by filling sink with a small amount of water. Turn deep cleaner ON and pick up the water with the tool.

3.Drain suction hose by turning deep cleaner ON and holding end of hose up for several seconds. Do not press trig- ger.

3-17

4.Disconnect deep cleaner from elec- trical outlet.

5.Drain solution tube by placing round end in sink and raising nozzle above your head. Press the trigger.

6.Proceed with steps c, d and e for “After cleaning” on page 11.

3-18

Occasionally, debris may become lodged inside of the hose at the con- verter end (L). To clean out the hose, lift bottom of converter clip (M) with a screwdriver and remove clip. Remove debris as shown.

SteamVac with Clean Surge specifications

The Hoover SteamVac with Clean Surge is a powerful and versatile carpet cleaner designed for tackling tough stains while ensuring ease of use for homeowners. With its innovative features and advanced technologies, this machine offers an efficient solution for keeping carpets and upholstery looking pristine.

One of the standout features of the Hoover SteamVac is its Clean Surge Technology. This allows users to apply extra detergent to heavily stained areas, ensuring a deeper clean. With the push of a button, the Clean Surge feature releases additional cleaning solution right where it's needed, making it particularly effective on stubborn spots, spills, and high-traffic areas.

The SteamVac also employs SpinScrub Brush System, which utilizes multiple brushes that rotate in a counter-oscillating motion. This unique design ensures superior cleaning by gently agitating carpet fibers and loosening dirt and grime. The brushes are designed to work on a variety of carpet types, providing a deep clean without causing damage to delicate fibers.

Powerful suction capability is another significant characteristic of the SteamVac. This ensures that not only are dirt and stains lifted from the carpet, but excess moisture is also effectively removed. This feature leads to quicker drying times, reducing the risk of mold and mildew growth. The two-tank system further enhances performance by keeping clean and dirty water separate, providing a more sanitary cleaning experience.

The Hoover SteamVac is designed with user-friendly features in mind. An ergonomic handle ensures comfortable use, even during extended cleaning sessions. Additionally, the lightweight design means that maneuverability is effortless, allowing users to navigate stairs and tight spaces with ease.

For added convenience, the SteamVac comes equipped with a range of attachments, including a stair cleaning tool and an upholstery tool. These attachments enable users to clean various surfaces around the home, extending the utility of the machine beyond standard carpet cleaning.

Overall, the Hoover SteamVac with Clean Surge stands out as a highly effective carpet cleaner that combines advanced cleaning technologies with user-friendly features. Its powerful stain removal capabilities, quick drying time, and versatility make it a dependable choice for anyone looking to maintain clean and fresh carpets in their home.

Hoover SteamVac with Clean Surge How to attach tool, Before using tool, After using tool

Models: SteamVac with Clean Surge