3-19

N

Snap clip back into position making sure solution hose (N) is not pinched and moves freely.

3-20

F

Replace recovery tank front panel (F).

Slide panel down until it snaps firmly in place.

Cleaning carpeted stairs

Read “Before you begin cleaning” instructions on page 10.

1.Place handle in upright position.

Agitator brushes will not rotate while handle is in upright position.

2.Fill clean solution tank with HOOVER Carpet/Upholstery Detergent according to instructions on pages 8 and 9.

3.Attach tool to end of hose.

4.Hose length may require that machine be placed at the top of the stairs to clean upper half of stairway and at bot- tom of stairs to clean lower half.

To prevent machine from falling, use extra caution when cleaning on stairs.

Do not place deep cleaner on stairs.

Do not point tools toward people or pets.

3-21

A

B

5.Dry hands and plug deep cleaner into a properly grounded outlet.

6.Turn deep cleaner ON. If necessary, refer to “Before using tool” section to remove air from system.

7.Pre-spray the carpeted stair by hold- ing the tool (A) or (B) about one inch above the carpet and push it forward while pressing the trigger (equals one wet stroke).

8.Position tool against the riser and slightly press it into carpet pile. Press the trigger and pull the tool slowly over the carpet (second wet stroke). Release trigger at end of stroke.

3-22

A

B

9.Lift tool, and position it against riser. Pull tool slowly over carpet without pressing trigger (dry stroke).

It is best to alternate wet and dry strokes as described above. End with more dry strokes to aid in faster drying of carpet.

10.Overlap strokes by 1/2 inch to help prevent streaking.

To avoid saturating carpet, do not use more than 4 wet strokes over any one area. Always end with dry strokes.

If additional cleaning is necessary, wait until the carpet is completely dry before using the tool again.

11.Empty recovery tank when the motor sound becomes higher pitched and there is a loss in suction (see “Automatic shut-off”, page 8).

When finished cleaning, follow “After cleaning” instructions on page 11 and “After using tool” instructions on page 13.

Cleaning upholstery

Read “Before you begin cleaning” Instructions on page 10.

Be sure to check the cleaning code on your upholstery. Use your HOOVER ‘SteamVac’ deep cleaner only on upholstery marked “W” or “W/S”.

1.Place handle in upright position.

Agitator brushes will not rotate while handle Is In upright position.

2.Fill clean solution tank with HOOVER Carpet/Upholstery Detergent according to instructions on pages 8 and 9.

3.Attach tool to end of hose.

Do not point tools toward people or pets.

4.Dry hands and plug deep cleaner into a properly grounded outlet.

3-23

A

B

5.Turn deep cleaner on. If necessary, refer to “Before using tool” section to remove air from system.

6.Gently press the tool (A) or (B) onto the fabric. Press the trigger and slowly pull the nozzle over the fabric.

7.Overlap strokes by 1/2 inch to help prevent streaking.

Make additional strokes without pressing the trigger to remove more moisture.

8.To clean in corners or creases, lift the tool one-half inch from the fabric and press the solution trigger.

9.Vacuum up the solution with the tool without pressing the trigger.

14

Page 13 Page 15
Page 14
Image 14
Hoover SteamVac with Clean Surge owner manual Cleaning carpeted stairs, Slide panel down until it snaps firmly in place
Page 13 Page 15

SteamVac with Clean Surge specifications

The Hoover SteamVac with Clean Surge is a powerful and versatile carpet cleaner designed for tackling tough stains while ensuring ease of use for homeowners. With its innovative features and advanced technologies, this machine offers an efficient solution for keeping carpets and upholstery looking pristine.

One of the standout features of the Hoover SteamVac is its Clean Surge Technology. This allows users to apply extra detergent to heavily stained areas, ensuring a deeper clean. With the push of a button, the Clean Surge feature releases additional cleaning solution right where it's needed, making it particularly effective on stubborn spots, spills, and high-traffic areas.

The SteamVac also employs SpinScrub Brush System, which utilizes multiple brushes that rotate in a counter-oscillating motion. This unique design ensures superior cleaning by gently agitating carpet fibers and loosening dirt and grime. The brushes are designed to work on a variety of carpet types, providing a deep clean without causing damage to delicate fibers.

Powerful suction capability is another significant characteristic of the SteamVac. This ensures that not only are dirt and stains lifted from the carpet, but excess moisture is also effectively removed. This feature leads to quicker drying times, reducing the risk of mold and mildew growth. The two-tank system further enhances performance by keeping clean and dirty water separate, providing a more sanitary cleaning experience.

The Hoover SteamVac is designed with user-friendly features in mind. An ergonomic handle ensures comfortable use, even during extended cleaning sessions. Additionally, the lightweight design means that maneuverability is effortless, allowing users to navigate stairs and tight spaces with ease.

For added convenience, the SteamVac comes equipped with a range of attachments, including a stair cleaning tool and an upholstery tool. These attachments enable users to clean various surfaces around the home, extending the utility of the machine beyond standard carpet cleaning.

Overall, the Hoover SteamVac with Clean Surge stands out as a highly effective carpet cleaner that combines advanced cleaning technologies with user-friendly features. Its powerful stain removal capabilities, quick drying time, and versatility make it a dependable choice for anyone looking to maintain clean and fresh carpets in their home.
Top Page Image Contents