INTRODUCTION

M A I N T E N A N C E

LIMITED HOME- USE WARRANTY

INTRODUCTION

IMPORTANT PRECAUTIONS

ASSEMBLY

BEFORE YOU BEGIN

TREADMILL OPERATION

Cleanliness of your treadmill and its operation environment will keep maintenance problems and service calls to a minimum. For this reason, we recommend that the following preventive maintenance schedule be followed.

AFTER EACH USE (DAILY)

Clean and inspect, following these steps:

Turn off the treadmill with the on/off switch, then unplug the power cord at the wall outlet.

Wipe down the running belt, deck, motor cover, and console casing with a damp cloth. Never use solvents, as they can cause damage to the treadmill.

Inspect the power cord. If the power cord is damaged, contact Horizon Fitness.

Make sure the power cord is not underneath the treadmill or in any other area where it can become pinched or cut.

Check the tension and alignment of the running belt. Make sure that the treadmill belt will not damage any other components on the treadmill by being misaligned.

EVERY WEEK

Clean underneath the treadmill, following these steps:

Turn off the treadmill with the on/off switch, then unplug the power cord at the wall outlet.

Fold the treadmill into the upright position, making sure that the lock latch is secure.

Move the treadmill to a remote location.

Wipe or vacuum any dust particles or other objects that may have accumulated underneath the treadmill.

Return the treadmill to its previous position.

EVERY MONTH - IMPORTANT!

Turn off the treadmill with the on/off switch, then unplug the power cord at the wall outlet.

Inspect all assembly bolts of the machine for proper tightness.

Turn off the treadmill and wait 60 seconds.

Remove the motor cover. Wait until ALL display screens turn off.

Clean the motor and lower board area to eliminate any lint or dust particles that may have accumulated. Failure to do so may result in premature failure of key electrical components.

Vacuum and wipe down the belt with a damp cloth. Vacuum any black/white particles that may accumulate around the unit. These particles may accumulate from normal treadmill use.

Weight Capacity = 325 LBS

FRAME • LIFETIME

Horizon Fitness warrants the frame against defects in workmanship and materials for the lifetime of the original owner, so long as the device remains in the possession of the original owner. (The frame is defined as the welded metal base of the unit and does not include any parts that can be removed.)

MOTOR • LIFETIME

Horizon Fitness warrants the motor against defects in workmanship and materials for the lifetime of the original owner, so long as the device remains in the possession of the original owner.

ELECTRONICS & PARTS • 2 YEARS Horizon Fitness warrants the electronic components, finish and all original parts for a period of two years from the date of original purchase, so long as the device remains in the possession of the original owner.

LABOR • 1 YEAR

Horizon Fitness shall cover the labor cost for the repair of the device for a period of one year from the date of the original purchase, so long as the device remains in the possession of the original owner.

What IS covered:

Repair or replacement of a defective motor, electronic component, or defective part and is the sole remedy of the warranty.

What IS NOT covered:

• Normal wear and tear, improper assembly or maintenance, or

installation of parts or accessories not originally intended or

compatible with the equipment as sold.

• Damage or failure due to accident, abuse, corrosion, discoloration

of paint or plastic, neglect, theft, vandalism, fire, flood, wind,

lightning, freezing, or other natural disasters of any kind, power

reduction, fluctuation or failure from whatever cause, unusual

atmospheric conditions, collision, introduction of foreign objects

into the covered unit, or modifications that are unauthorized or not

recommended by Horizon Fitness.

• Incidental or consequential damages. Horizon Fitness is not

responsible or liable for indirect, special or consequential damages,

economic loss, loss of property, or profits, loss of enjoyment or use,

or other consequential damages of whatsoever nature in connection

with the purchase, use, repair or maintenance of the equipment.

• Equipment used for commercial purposes or any use other than a

single family or Household, unless endorsed by Horizon Fitness for

coverage.

• Equipment owned or operated outside the US and Canada.

• Delivery, assembly, installation, setup for original or replacement

units or labor or other costs associated with removal or replacement

of the covered unit.

• Any attempt to repair this equipment creates a risk of injury.

Horizon Fitness is not responsible or liable for any damage, loss or

liability arising from any personal injury incurred during the course

of, or as a result of any repair or attempted repair of your fitness

equipment by other than an authorized service technician. All

IMPORTANT PRECAUTIONS

ASSEMBLY

BEFORE YOU BEGIN

TREADMILL OPERATION

CONDITIONING TROUBLESHOOTING GUIDELINES & MAINTENANCE

EVERY 6 MONTHS OR 150 MILES

It is necessary to lubricate your treadmill running deck every six months or 150 miles to maintain optimal performance. Once the treadmill reaches 150 miles, the console will display the message “LUBE” or “LUBE BELT”. The treadmill will not operate while the message is showing. Hold Stop for 5 seconds to suspend message for 5 miles. Your treadmill came with a bottle of lubricant which can be used for two applications. If you need lubricant contact Horizon Fitness. Only use lubricant provided by Horizon Fitness.

Turn off the treadmill with the on/off switch, then unplug the power cord at the wall outlet.

Loosen both the rear roller bolts. (For best results, place two removable marks on both sides of the frame and note roller position). Once the belt is loosened, take the bottle of lubricant and apply it to the entire top surface of the running deck. Tighten both rear roller bolts (matching up the marks for proper position) to original position. After you have applied lubricant, plug in the power cord, insert the safety key, start the treadmill and walk on the belt for two minutes to spread the lubricant.

Lubricate the air shocks with Teflon based spray.

LUBRICATION

RUNNING BELT

RUNNING DECK

EXCLUSIONS AND LIMITATIONS

Who IS covered:

• The original owner and is not transferable.

repairs attempted by you on your fitness equipment are undertaken

AT YOUR OWN RISK and Horizon Fitness shall have no liability for any

injury to the person or property arising from such repairs.

SERVICE/RETURNS

In-home service is available within 150 miles of the nearest

authorized repair center (Mileage beyond 150 miles from an

authorized service center is the responsibility of the consumer).

• All returns must be pre-authorized by Horizon Fitness.

• Horizon Fitness’ obligation under this warranty is limited to

replacing or repairing, at Horizon Fitness’ option, the same or

comparable model at one of its authorized service centers.

• A Horizon Fitness authorized service center must receive all

equipment for which a warranty claim is made. This equipment

must be received with all freight and other transportation charges

prepaid, accompanied by sufficient proof of purchase.

• Replacement units, parts and electronic components reconditioned

to As-new Condition by Horizon Fitness or its vendors may

sometimes be supplied as warranty replacement and constitute

fulfillment of warranty terms.

TROUBLESHOOTING CONDITIONING & MAINTENANCE GUIDELINES

LIMITED

WARRANTY

30

Once lubrication is complete, reset the console by pressing and holding ‘STOP’ and Speed ‘+’ buttons for 5 seconds.

Please contact Horizon Fitness with questions about applying lubricant to your treadmill.

• This warranty gives you specific legal rights, and your rights may

vary from state to state.

31

LIMITED WARRANTY

T901_Rev.2.0.indd 30-31

9/10/08 11:16:06 AM

Page 16
Image 16
Horizon Fitness T901 manual I N T E N a N C E Limited HOME- USE Warranty, Lubrication