Hoshizaki DCM-300BAH(-OS) instruction manual DCM-300BAH-OS, Icemaker

1. Icemaker

•Icemaker water supply inlet is 1/2" female pipe thread (FPT). A minimum of 1/4" nominal

ID copper water tubing or equivalent is required for the icemaker water supply line.

•An icemaker water supply line shut-off valve and drain valve should be installed.

•Storage bin and drip tray drain outlets are 3/4" FPT. A minimum of 3/4" nominal ID hard pipe or equivalent is required for the storage bin and drip tray drain lines.

Icemaker

Icemaker Water Supply

Icemaker Water Line Shut-Off Valve

Supply Inlet

1/2" FPT

Minimum 1/4"

Nominal ID Copper

Water Tubing

Drip Tray	Vent	Icemaker Water Supply
Drain Outlet
	Tube
3/4" FPT		Line Drain Valve

Storage Bin
Drain Outlet	Stand
3/4" FPT

Separate piping to approved drain. Leave a 2-inch (5‑cm) vertical air gap between the end of each pipe and the drain.

Minimum 3/4" Nominal ID	2-inch (5-cm)
	air gap
Hard Pipe

DCM-300BAH(-OS)

Floor Drain

Fig. 4

14