If a Hoshizaki
bins listed above.
h. Remove the two screws from the lower part of the thermostat bracket (plastic) and use them to attach the thermostat extension bracket (stainless) to the thermostat bracket (plastic).
Thermostat Bracket
(plastic)
Thermostat Extension
Bracket (stainless)
Fig. 4
If a Hoshizaki
g. Remove the two screws securing the thermostat |
| (plastic)Thermostat Bracket |
bulb attachment (plastic) to the thermostat extension | ||
bracket (stainless). Use the two screws to attach |
|
|
the "Z" bracket (plastic) to the thermostat extension |
| |
bracket (stainless). | Thermostat Bulb | |
h. Use the two 4×10 stainless steel screws in the | Attachment (plastic) | |
|
| |
accessory bag to attach the thermostat bulb |
|
|
attachment (with attached thermostat bulb) to the "Z" | Thermostat Extension | |
bracket. |
| Bracket (stainless) |
i. Remove the two screws from the lower part of the |
| "Z" Bracket (plastic) |
thermostat bracket (plastic) and use them to attach | ||
the thermostat extension bracket (stainless) to the | Fig. 5 | |
thermostat bracket (plastic). |
|
|
6)Level the icemaker/storage bin in both the
7)Place the panels and baffle in position (unless you are installing a second unit). (See "E. Installation of Second Unit.")
E. Installation of Second Unit
1)See "D. Setup" for the lower unit installation.
2)Remove the top panel and the top insulation of the lower unit. The top panel and the top insulation of the lower unit are not required when installing the second icemaker.
3)Unpack the second icemaker (upper unit), and remove all shipping cartons, tape and packing.
4)Remove the panels of the second icemaker.
5)Stack the upper unit on top of the lower unit.
6)Secure the upper unit to the lower unit by using the two universal braces and the four bolts provided.
Universal Brace 
Bolt 
Icemaker (Upper Unit)
Icemaker (Lower Unit)
Bin
Fig. 6
16
