Hoshizaki KM-2000SRF3, KM2000SWF3, KM-2000SRH3, KM-2000SWH3 Control Products HOSHIZAKI001 Board

to the K1 connector. If there is a white wire, place the switch in the C position. If this switch is placed in the wrong position either the compressor contactor will remain ener- gized with the control switch OFF or the unit will not start.

The dip switches should be adjusted per the adjustment chart published in the Tech Specs book. 7 & 8 must remain in the OFF position.

(Control Products HOSHIZAKI001 Board)

14