About the crispers and pans.
Not all features are on all models.
Fruit and Vegetable Crispers
Excess water that may accumulate in the bottom of the drawers should be wiped dry.
On some models, the bottom drawer has full extension slides that allow full access to the drawer.
H I 
L O
Adjustable Humidity Crispers
Slide the control all the way to the HI setting to provide high humidity recommended for most vegetables.
Slide the control all the way to the LO setting to provide lower humidity levels recommended for most fruits.
C
O
L
D
C
O
L
D
E
S
T
Convertible Meat Pan
The convertible meat pan has its own cold air duct to allow a stream of cold air from the freezer compartment to flow to the pan.
The variable temperature control regulates the airflow from the Climate Keeper.
Set the control to the coldest setting to store fresh meats.
Set the control to cold to convert the pan to normal refrigerator temperature and provide extra vegetable storage space. The cold air duct is turned off. Variable settings between these extremes can be selected.
About crisper removal.
Not all features are on all models.
Crisper Removal
The top crispers can easily be removed by pulling the drawer straight out and lifting the drawer up and over the stop location.
If the door prevents you from taking out the drawers, first try to remove the door bins.
If this does not offer enough clearance, the refrigerator will need to be rolled forward until the door opens enough to slide the drawers out. In some cases, when you roll the refrigerator out, you will need to move the refrigerator to the left or right as you roll it out.
To remove the bottom crisper:
Pull the drawer out to the stop position.
To replace the bottom crisper:
Place the back of the drawer in the wire holder, making sure the wire holder fits into the grooves on the back of the pan.
Lower the front of the drawer into the wire holder.
Pull the bottom of the wire holder forward until the wire pops into the groove located on the bottom of the drawer.
14
Lift the front of the drawer up and out of the wire holder.
Lift the back of the drawer up and out.
Pop wire into groove.
