Hotpoint 23 Inserting the door panels, Insert the Freezer Panel and Refrigerator Panel

Models: 23

1 40
Download 40 pages 35.33 Kb
Page 22
Image 22
Inserting the door panels.

Inserting the door panels.

Read these instructions completely and carefully.

Insert the Freezer Panel and Refrigerator Panel.

Carefully push the freezer panel in until it slides into the slot behind the door handle. Push the filler panel (required with some door panels) in behind the decorator panel. Repeat for refrigerator panel.

If your model has a dispenser, this step only applies to the refrigerator panel and top freezer panel.

Insert the Bottom Freezer Panel. (on dispenser models)

Carefully push the panel in until it slides into the slot behind the door handle. Push the filler panel

(required with some door panels) in behind the decorator panel.

Attach the Top Trim on the Freezer and Refrigerator Doors.

The Top Trim can be found inside the refrigerator compartment.

With a T-20 Torxdriver, attach the Top Trim, using two screws on each Top Trim piece, to the top of

each door. Hand tighten only. Make sure that the top of each panel fits snugly behind the lip of the Top Trim.

Top Trim Screws Insert the Freezer Panel and Refrigerator Panel.

Cut-Out

Top Trim Screws Insert the Bottom Freezer Panel. (on dispenser models)

Cut-Out

Top

Freezer

Panel

Refrigerator

Panel

Bottom

Freezer

Panel

Side Trim

Side Trim Attach the Top Trim on the Freezer and Refrigerator Doors.

22

Page 22
Image 22
Hotpoint 23 operating instructions Inserting the door panels, Insert the Freezer Panel and Refrigerator Panel