Manuals / Hotpoint / Kitchen Appliance / Refrigerator

Hotpoint 23 Removing And Replacing The Doors, Dimensions And Specifications, Tools You Will Need

Models: 23

1 40

Download 40 pages 35.33 Kb

Page 26

Image 26

Installation Instructions

DIMENSIONS AND SPECIFICATIONS

(FOR BUILT-IN STYLE MODELS)

	Water	Electrical
	19 mm
61 cm	Airspace
61 cm	13 mm Gap +
Cabinet	13 mm Gap +	63.5 cm
Cabinet	6 mm Wall	63.5 cm
	6 mm Wall	Countertop
	Plates)	Countertop
	Plates)

178.4 cm

91.4 cm

61 cm

REMOVING AND REPLACING THE DOORS

If the refrigerator must go through any entrance that is less than 38″ wide, the doors must be removed.

DO NOT remove the handles.

TOOLS YOU WILL NEED

1 REMOVE THE BASE GRILLE

Remove the grille by removing the two Phillips head screws.


Plastic putty knife		3/8″ and 5/16″ Socket

Phillips head screwdriver

Page 26

Image 26

Hotpoint 23 Removing And Replacing The Doors, Dimensions And Specifications, Tools You Will Need, Remove The Base Grille

Contents

Owner’s Manual Model 23 and Installation Installation InstructionsTroubleshooting Tips RefrigeratorsIMPORTANT SAFETY INFORMATION READ ALL INSTRUCTIONS BEFORE USING SAFETY PRECAUTIONSSAVE THESE INSTRUCTIONS PROPER DISPOSAL OF THE REFRIGERATORELECTRICAL SUPPLY UNITED KINGDOM ONLY Before You Throw Away Your Old Refrigerator or Freezeron CustomCool models. for other models, see next page About the temperature controlsAmbient Room Temperature Limits ADJUST REFRIGERATOR TEMP About the temperature controlsAmbient Room Temperature Limits COLDERAbout the temperature controls About TurboCoolHow it Works Ambient Room Temperature LimitsHow it Works How to UseAbout CustomCool. on some models ExpressThaw ExpressChillCustomCool Chart About CustomCool. on some modelsWhen to Replace the Filter About the water filterWater Filter Cartridge on some models Installing the Filter CartridgeRefrigerator Doors About the refrigerator doorsAbout the shelves and bins Refrigerator Door Bins and Freezer Door Tilt-Out BinsRemovable Beverage Rack Slide-Out Spillproof ShelfQuickSpace Shelf Door Wine/Beverage Rack on some modelsSlide-Out Freezer Shelves Deep Freezer BasketsFreezer Baskets Fixed Freezer ShelvesFreezer Performance About the freezer compartmentLoading the Freezer Compartment About crisper removal Adjustable Humidity CrispersAbout the crispers and pans Fruit and Vegetable CrispersIce Storage Drawer About the automatic icemakerAutomatic Icemaker Door Alarm on some models About the ice and water dispenser. on some modelsTo Use the Dispenser Locking the Dispenser on some modelsCleaning the Inside Care and cleaning of the refrigeratorCleaning the Outside Ice Storage Drawer on Dispenser ModelsPreparing to Move Behind the RefrigeratorPreparing for Vacation Care and cleaning of the refrigeratorFreezer Compartment Replacing the light bulbsRefrigerator Compartment-Upper Light Dispenser19 mm or Raised Panel Trim kits and decorator panelsPanels less than 6 mm thick Weight limitations for custom panels Refrigerator Door 17 kg max8 mm Dimensions for Custom Wood Panels3 mm 170.9 cm FRONT 36.8 cmInsert the Bottom Freezer Panel. on dispenser models Inserting the door panelsInsert the Freezer Panel and Refrigerator Panel Attach the Top Trim on the Freezer and Refrigerator DoorsInstall the Side Trim BEFORE YOU BEGIN DIMENSIONSModel CLEARANCESDOOR ALIGNMENT Installation InstructionsROLLERS To adjust the rollers on 23′ modelsTOOLS YOU WILL NEED DIMENSIONS AND SPECIFICATIONSREMOVING AND REPLACING THE DOORS 1 REMOVE THE BASE GRILLE5 CLOSE THE FREEZER AND REFRIGERATOR DOORS 3 DISCONNECT THE POWER COUPLING ON SOME MODELS4 DISCONNECT THE ELECTRICAL CONNECTORS ON SOME MODELS 2 DISCONNECT THE WATER COUPLING ON SOME MODELS7 REMOVE THE REFRIGERATOR DOOR Installation Instructions REMOVING AND REPLACING THE DOORS CONT6 REMOVE THE FREEZER DOOR 7 REMOVE THE REFRIGERATOR DOOR CONT 8 REPLACING THE DOORSInstallation Instructions However, please note the followingBEFORE YOU BEGIN Installation Instructions INSTALLING THE WATER LINE1 CONNECT THE TUBING TO THE REFRIGERATOR Installation Instructions 3 START THE ICEMAKER2 TURN THE WATER ON AND PLUG IN THE REFRIGERATOR WHOOSH Normal operating soundsHUMMM CLICKS, POPSProblem Before you call for service…Troubleshooting Tips Possible CausesPossible Causes Before you call for service…Problem What To DoSee Care and cleaning Problemsetting. This is normal Possible CausesIn addition to other information in Owner’s Manual Special Installation Instructions for Australia and New ZealandIMPORTANT SAFETY INSTRUCTIONS Shut Off the Main Water Supply Installing the Water LineBefore You Begin Special Installation Instructions for Australia and New Zealand Installing the Water Line contConnecting the Tubing to the Shutoff Valve Start the Icemaker Turn the Water OnPlug In the Refrigerator Electromagnetic Compatibility 89/336/EEC 92/31/EEC 93/68/EEC This appliance conforms to the following EEC DirectivesLow Voltage Equipment 73/23/EEC 93/68/EEC Printed in Mexico