Installing the Water Line

For Australian and New Zealand installation, read these instructions completely and carefully.

Before You Begin

IMPORTANT: Government legislation and Codes in most States and Territories of Australia require installation by a licensed plumber. The installation must conform to Australian Standard AS 3500.1 Water supply.

Water hammer (water banging in the pipes) in house plumbing can cause damage to the refrigerator parts and lead to water leakage or flooding. Call a qualified plumber to correct water hammer before installing the water supply line to the refrigerator.

To prevent burns and refrigerator damage, do not hook up the water line to the hot water line.

If you use your refrigerator before connecting the water line, make sure the icemaker power switch is set to the O position.

Do not install the icemaker tubing in areas where the temperatures fall below freezing.

Shut Off the Main Water Supply

For models fitted with an icemaker, a water supply kit (containing flexible tubing and fittings) is supplied with the refrigerator.

The water pressure must be between 138 and 827 kPa on models without a water filter fitted and between 275 and 827 kPa on models with a water filter fitted.

Turn Off the water and open a low tap to drain the water from the pipe.

Complying with the plumbing codes, install a suitable branch fitting (not supplied) to the cold water supply.

Extend the branch to a suitable location adjacent to the refrigerator when it is located in its operating position. Terminate the branch with a shutoff valve (not supplied).

IMPORTANT: The shut-off valve should be accessible (such as in an adjacent cupboard, as close to the wall as possible) when the refrigerator is in its normal operating position.

If your water supply pressure is higher than 690 kPa during the day (if so, it may reach higher levels at night), install a suitable Pressure limiting valve (not supplied), after the shut-off valve, making sure the “flow arrows” on the body of the device face the same direction as the water flow.

If necessary, assemble a suitable fitting (not supplied) to the up-stream end of the shutoff valve (or pressure limiting valve) for attachment of the fitting supplied with the water supply kit.

NOTE: PTFE tape should be used for a water tight seal when assembling all the above fittings.

Do not turn the water supply On at this time.

37

Page 37
Image 37
Hotpoint 23 operating instructions Before You Begin, Shut Off the Main Water Supply

23 specifications

Hotpoint is a renowned brand in the field of home appliances, and their Hotpoint 23 model exemplifies their commitment to quality, functionality, and contemporary design. The Hotpoint 23 is particularly notable for its advanced features, which cater to the needs of modern households.

One of the primary features of the Hotpoint 23 is its spacious capacity, which can accommodate a variety of cooking needs. Whether you're reheating leftovers or cooking a family meal, the Hotpoint 23 offers enough space to handle it all. Its interior design allows for flexibility, with adjustable shelves that can be reorganized to suit various dish sizes.

This model also boasts a range of cooking technologies that enhance the cooking experience. One standout feature is the combination of microwave and grill functions. This dual cooking capability allows users to quickly cook food while achieving a desirable crispy texture on the outside. The grill function is especially beneficial for preparing dishes like grilled chicken or crispy vegetables, ensuring a well-rounded meal with minimal effort.

Energy efficiency is another critical characteristic of the Hotpoint 23. Designed with eco-friendly technologies, this appliance reduces energy consumption, which is not only beneficial for the environment but also helps lower utility bills. It is equipped with various energy-saving settings that allow users to optimize their cooking processes, making it ideal for environmentally-conscious consumers.

The Hotpoint 23 also places a strong emphasis on user-friendly operation. It features an intuitive control panel that provides quick access to different cooking modes and settings. Users can easily navigate through options, ensuring that meals can be prepared efficiently. Furthermore, the model includes pre-programmed cooking settings that simplify the process, allowing users to achieve perfect results without needing to monitor closely.

Safety is another priority for Hotpoint, and the Hotpoint 23 includes several safety features such as a child lock, preventing accidental use by young children. The appliance also has an automatic shut-off function, which enhances safety during operation.

In summary, the Hotpoint 23 is an impressive kitchen appliance that combines spacious cooking capacity, innovative cooking technologies, energy efficiency, user-friendly operation, and essential safety features. Whether for a busy family or a culinary enthusiast, the Hotpoint 23 is designed to meet diverse cooking needs while ensuring convenience and reliability. Its thoughtful design and advanced functionalities make it a valuable addition to any modern kitchen.