Hotpoint CH 10755 GF S, CH 10756 GF S, CH 10750 GF S Something wrong with your cooker

Models: CH 10750 GF S CH 10755 GF S CH 10756 GF S

1 24
Download 24 pages 59.89 Kb
Page 19
Image 19
Something wrong with your cooker

Something wrong with your cooker

GB

Before contacting your nearest Service Centre/ Installer, check the problem guide below; there may be nothing wrong with your cooker.

If there is still a problem contact your local Service office (see back page).

PROBLEM

CHECK

 

 

Slight odour or small amount of smoke

This is normal and should cease after a short period.

when grill/oven used for first time.

 

 

 

Oven cooks too fast or too slow.

Check that the oven setting and shelf positions are as recommended in

 

the Cooking Charts. However, it may be necessary to increase or

 

decrease the recommended setting slightly to suit your taste.

 

 

Ignition does not work:

If all burners fail to ignite :

 

Check that sparks appear at the burners; a clicking noise should be heard.

 

If not;

 

(i) Check that the electricity supply is turned on.

 

(ii) Check other appliances to see if you have had a power cut.

 

If only one burner fails to ignite :

 

(i) Check the burner cap is seated correctly.

 

(ii) Check the slots in the burner bodies are not blocked with any soap

 

residue or cooking soil (see care and cleaning).

 

(iii) Check, if the burners have recently been cleaned using a wire wool

 

pad eg. "Brillo Pad', ensure that no stray strands are caught on the

 

ignitor or burner body.

 

NOTE. Satisfactory ignition will only be achieved if all the hotplate burners are

 

fitted. In the event of an electricity failure, all burners can be lit with a match.

 

 

Cannot set an "Auto Cook" programme

Read the Timer instructions in this book carefully remembering that the

or cannot get the timer to turn the oven

Cook period is the length of time that the timer will switch the oven(s) on

on or off at the required times.

as part of an Auto Cooking Programme.

 

 

Timer Display shows "0:00" with

The electricity supply to the cooker may have been been interrupted, but

has now come back on again. Set the correct time of day by following

"AUTO" Flashing.

the instructions given in the timer section of this book.

 

 

 

Fanned oven does not work, but the

The Timer may be set for an Auto Cooking programme. Check the Timer

grill, top oven and hotplate burners

to see if "AUTO" is illuminated. If it is, follow the instructions given in the

work.

Timer section of this book to cancel the Auto Cooking programme.

 

The oven lamp is not covered by the guarantee. The part is easily

Oven lamp does not work.

changed (see the section on oven lamp replacement). A new lamp may be

 

obtained from our Parts department, (see back page).

 

 

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

19

Page 19
Image 19
Hotpoint CH 10755 GF S, CH 10756 GF S, CH 10750 GF S operating instructions Something wrong with your cooker