Hotpoint DWF61, DWF60 With the dishes, cutlery, etc, Plastic items are discoloured

Models: DWF61 DWF60

1 28
Download 28 pages 5.13 Kb
Page 24
Image 24
...With the dishes, cutlery, etc.

...With the dishes, cutlery, etc.

Remnants of food are stuck to the dishes, cutlery, etc.

-Dishwasher was not loaded properly. Jets of water could not reach all parts of the dishes etc.

-Too many items in the rack.

-Items in the rack were touching each other.

-Not enough detergent was added to the dispenser.

-Selected wash programme was not intensive enough.

-Rotation of spray arm was obstructed by dish, etc.

-Nozzles in spray arm are blocked by remnants of food.

-Filters are blocked.

-Filters have been incorrectly fitted.

-Waste-water pump is jammed.

Plastic items are discoloured

-Not enough detergent was added to dispenser.

-Detergent has insufficient bleaching properties, use a detergent containing a chemical bleaching agent.

White stains are left on crockery, glasses have a milky appearance.

-Not enough detergent was added to input compartment.

-Amount of rinse-aid was set too low.

-Although water is quite hard, no salt has been put in appliance.

-Water softener was set too low.

-Lid on salt container is not screwed tight.

-If you used a phosphate-free detergent, try a detergent containing phosphates and compare results.

Dishes, cutlery etc. have not been dried.

-Selected programme did not include drying function.

-Amount of rinse-aid was set too low.

-Items were removed from dishwasher too soon.

Glasses have a dull appearance.

-Amount of rinse-aid was set too low.

Tea stains or traces of lipstick have not been completely removed.

-Detergent does not have enough bleaching effect.

-Washing temperature was set too low.

Traces of rust on cutlery.

-Cutlery is not sufficiently rust proof.

-Salt content in washing water is too high.

-Lid on salt container is not screwed on tight.

-Too much salt spilt whilst filling the container.

Glasses become clouded and discoloured; coating cannot be wiped off.

-Unsuitable detergent was used.

-Glasses are not dishwasher proof.

Smears left behind on glasses and cutlery; glasses have acquired a metallic appearance.

-Amount of rinse-aid set too high.

24

Page 24
Image 24
Hotpoint DWF61 With the dishes, cutlery, etc, Plastic items are discoloured, Dishes, cutlery etc. have not been dried