D ISHWASHER
Fault Area | Issue | Cause/How to resolve… |
Wash cycle indicators lights 4
&5 flashing (Fast & Prewash).
-Watertapturnedoff
Indicators 4&5
(Fast & Prewash)
If you are not at your dishwasher when the short beeps sound, the dishwasher will switch to alarm mode and indicator lights 4 & 5 (Fast & Prewash) will flash.
Followtheinstructionsbelowtocancel:
Step 1:
Turnthedishwasheroffbypressingthe“On/Off”button.
Step 2:
Turnonthewatertap
Step 3:
Wait approximately 20 seconds and then switch the appliance on by pressingthe“On/Off”button.
Step 4:
Selectwashprogrammeasnormal.
Please Note:
If the above does not solve the problem, check that the water feed pipe filter is not blocked.
Wash cycle indicator lights 3&5 flashing (Eco& Prewash).
- Possible Filter Blockage
Indicators 3 & 5
(Eco & Prewash)
If wash cycle indicator lights 3 & 5 (Eco & Prewash) are flashing, then youneedtoclearthefilterofanyblockagesbeforeprogrammecanproceed.
Step 1: Press the “On/Off Button”, to turn off your dishwasher.
Step 2: Remove filter from base of machine (Fig.1)
Step 3: Rinse filters under running water and ensure that large food particlesareremovedfromAreaA(Fig.2).
Step 4: Locate filters back into the filter housing and firmly press downwards.
Step 5: Turn the dishwasher on by pressing the “On/Off” button, and selectrequiredprogramme.
| $ |
|
Fig.1 |
| Fig.2 |
|
|
|
For additional advice on Cleaning your filter see “Care and Cleaning”section of the instruction book.
17