Hotpoint FDW65 manual D Ishwasher, Fault Area, Issue, Cause/How to resolve…, Cycle Phase Indicator

D ISHWASHER

Fault Area Issue Cause/How to resolve…

Wash Cycle indicator light 4 flashing (Fast).

-Water load solenoid valve malfunctionalarm.

Indicator4 (Fast)

Cycle Phase Indicator	“Drying” light flash -
Lights Flashing	-Indicatesandofprogramme

When a“Pre-Wash”programme is selected, the “Rinse” light will illuminate.

Ifindicatorlight4(Fast)flashesrapidly,TURNthedishwasherOFFAND BACKON againafter oneminute.Ifthealarmpersists,firstturnoffthe watertaptoavoidanyfloodingandthencutofftheelectricitysupplyand callfortechnicalassistance.

The “Drying” phase indicator light will flash in the display to indicate the programmeiscomplete.

-Pressthe“On/Off”buttontoswitchoffthedishwasher.

Please Note:

When your dishwasher is switched back on, the “Drying” phase indicator light will continue to flash ntil a new programme is selected or the machine is reset - This is normal.

Thisisnormal-TheRinseLight, ratherthanthePrewashlightilluminates becausePrewashisbasicallya“ColdRinse”cycle.(i.e.themachineis usingpartoftherinsecycletogivethePrewashfunction).

Poor Wash Results	Residue On Dishes When Wash	- Istheselectedprogrammesuitableforthetypeofloadandthe
		degree of soiling?
	CycleComplete.
		- Check the loading of your crockery into the baskets (See “Loading
		You Dishwasher” Section of the instruction book).
		- Check that the filters are clean and in place (See “Care and
		Cleaning” Section of the instruction book.)
		- Is the lid of the salt container closed properly?

- Is the rinse aid dosage correct?

(Seesection“PoorDryingResults”belowforinstructionsonadding or adjusting rinse aid to your wash).

18