Hotpoint RGB744GEJ, RGB746GEJ warranty CLEAXINGlight ison can, Questiom Bnd Answers

a!a later tire than shown-onthe -

=dimitalclock, push in and turnthe

.gg~$ &

c‘ws-STARTdialY to the time youwish to shrt. Addthe hoursneededfor cleaningto this “start” time,then pushin and turn the S~P dialto thisdesired time. The ovenwill automaticallyturn on andoffat the settimes.

If You Have to InterruDt the

Step 1. Turn the S~P dialuntilthe pointer is at the correct timeof day.

Step2. Push the self-cleanlatch leverto the leftas far as it willgo. If the LOCKED lightis on, youmust waituntilthe lightgoes offbefore movingthe latch lever. This will unlockthe ovendoor so it can be opened.

Step 3. Turn the OVEN SET knob from CLEAN to OFF.

ImpQrtint: Any attempt to unlock the door by forcewhile

the CLEAXINGlight ison can

result indamage tothe door

Questiom Bnd Answers

Q. why won’tmy ovenclean immediately even though I set tile timeand OVEN SETl~nob

Correctly?

A.Check to be sure your START dial is set t~ the same time as the range clock. Also check to be sure LATCH LEVER is movedto the right as far as it will go.

Q.If my oven ‘clockis not working, can I still self-clean my oven?

A.No. YourAutomaticOven Timer uses the range clock to help start and stop your self-cleaning cycle.

Q.can I use commercial oven cleaners on any part of my self-cleaning oven?

A.No cleaners or coatings should. be used around any part of this oven. If you do use them and do not wipe the oven absolutely clean, the residue can scar the oven surface and damage metal parts the next time the oven is automatically cleaned.

Q.can I clean the woven Gasket around the oven door?

A.No, this gasket is essential for

a good oven seal and care must be taken not to rub, damage or move this gasket.

Q. What should I do if excessive

Smoking occurs during Cleaning?

A.This is caused by excessivesoil, and you should switch the OVEN SET knob to OFF. Open windows to rid room of smoke. Allow the oven to cool for at least one hour before opening the door. Wipe up the excess soil and reset the clean cycle.

Q.Is $he “crae!iling” sound I lnealrduring Cleaning normal?

A.Yes.This is the soundof the meti heating and cooling during both the coolting and cleaning functions.

Q. should there beany odor

during the cleaning?

A..Yes,there maybe a slightodor during the first fewcleanings. Failure to wipe out excessivesoil might also cause a strongodor when cleaning.

Q.what Causestile hair-like lines on the enameled surface of my oven?

A, This is a normal condition, resulting from heatingand cooling during cleaning. These lines do not affect how your ovenperforms.

Q. why do I have ash left in my oven after cleaning?

A.Some types of soil will ieave a deposit which is ash. It can be removedwith a damp spongeor cloth.

Q.My oven shelves do not slide easily. ‘Whatis the matter?

A.After many cleanings, oven

shelves may become so clean they do not slide easily. If you wish shelves to slide more easily, dampen fingers with a small amount of cooking oil and rub lightly over sides of shelf where [hey contact shelf supports.

Q.My oven shelves have become gray after the self-clean cycle. Is this normal?

A.Yes. After the self-clean cycle, the shelves may discolor and lose some of their original luster.

—..——.