PRODUCT SAFETY

ATTENTION

Read your manual carefully since it contains instructions which will ensure safe installation, use and maintenance of your appliance.

Your Refrigerator is built to International safety standards (EN60) and has been awarded the European approval mark (IMQ) for compliance with UK electrical safety requirements. It also meets the EC standards on the prevention and elimi- nation of radio interference (EC directive 87/308 - 02.06.89).

1.This appliance must not be installed outdoors - not even in an area protected by a roof. It is extremely dangerous to leave it exposed to rain or storms.

2.It must only be used by adults and exclusively to re- frigerate and freeze foodstuffs, following the instructions for use contained in this manual.

3.Do not ever touch or handle the appliance with bare feet or with wet hands or feet.

4.It is highly recommended that you do not use extension cords or multiple socket adapters. If the refrigerator is in- stalled between cabinets, make sure that the cord is not bent or dangerously pinched or compressed.

5.Never pull on the cord or the refrigerator to remove the plug from the wall socket - this is very dangerous.

6.Never touch the cooling components within the appli- ance, especially with wet hands because this could result in injury.

7.Never put ice cubes just removed from the freezer into your mouth because they could stick to your mouth and

cause burns.

8.Never clean the appliance or perform maintenance without first disconnecting it from the electrical mains. Turning the thermostat knob to the "OFF" setting does not suffice to break all electrical contact with the mains.

9.Before having your old refrigerator picked up for dis- posal, remove or make inoperable any locking devices to prevent children who might play in or around the appliance from being locked inside.

10.Before calling for service/assistance in the case of malfunction, consult the chapter entitled “Troubleshooting" to determine whether it is possible to eliminate the prob- lem. Do not try to repair the problem by trying to access the internal components of the appliance.

11.If damaged, the power supply cord on this appliance must necessarily be replaced by our service centre because special tools are required for replacement.

12.Do not use electric appliances inside the compartment for food storage, if these are not those recommended by the manufacturer.

13.At the end of the functional life of your appliance – containing cyclopentane gas in the insulation foam and perhaps gas R600a (isobutane) in the refrigeration circuit

– the latter should made safe before being sent to the dump. For this operation, please contact your dealer or the Local Organisation in charge of waste disposal.

INSTALLATION

To ensure that the appliance operates properly and to reduce energy consumption, it is important that the appliance is installed correctly.

Ventilation

The compressor and condenser generate heat and, therefore, need to be ventilated properly. Avoid placing refrigerator in direct sunlight, or next to an electric stove or similar appliance. Areas not adequately ventilated are not suitable for this appliance.

During installation, make sure not to cover or obstruct the grates that allow for proper ventilation of the appliance.

Away from Heat

Avoid positioning the appliance in a place where it is directly exposed to sunlight or near an oven, hob or the like.

Electrical Connection and Earthing

Before proceeding with the electrical connection, make sure that the voltage indicated on the rating plate, located at the bottom left near the fruit and vegetable crisper,

corresponds

to the mains voltage in your home and that the socket is fitted with a standard earthing wire in accordance with safety standards for 46/90 systems. If the socket is not fitted with an earthing wire, the manufacturer will not be held liable for any damages and/or injuries arising out of the use of the appliance. Do not use multiple sockets or adapters.

Position the appliance in such a way that you can access the socket where it is plugged in. Insufficient power?

The electrical socket must be able to handle the maximum power load of the appliance, which is indicated on the rating plate located at the bottom left next to the vegeta- ble crisper.

Before making the electrical connection ...

After the appliance has been delivered, place it in the ver- tical upright position and wait at least 3 hours before in- serting the plug into the socket in order to ensure that it functions properly.

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR 5 YEAR PARTS GUARANTEE ON 08448 24 24 24

3

Page 2 Page 4
Page 3
Image 3
Hotpoint RSAAV21P, RSA 21 manual Product Safety, Installation, Away from Heat, Before making the electrical connection
Page 2 Page 4

RSAAV21P, RSA 21 specifications

The Hotpoint RSA 21 and RSAAV21P models exemplify innovation and efficiency in kitchen appliances, catering to modern consumer needs through advanced features and robust design. These refrigerators are optimized to offer exceptional performance while ensuring food preservation and energy savings.

One prominent feature of the Hotpoint RSA 21 is its spacious capacity. With a generous internal layout, it provides ample storage space for groceries, making it easy to organize food items. Its adjustable shelves allow users to customize the interior according to their storage requirements, accommodating everything from tall bottles to frozen goods without hassle.

The RSAAV21P model enhances convenience further with its advanced cooling technologies. This refrigerator employs a Multi Air Flow system that ensures uniform temperature distribution throughout the interior. By circulating cold air evenly, it minimizes temperature fluctuations, keeping food fresher for longer. This innovative system is particularly beneficial for maintaining the quality of perishable items, reducing waste, and saving money.

Energy efficiency is another standout feature of these models. They are designed to meet modern sustainability standards, consuming less power while delivering high performance. The inclusion of an Eco Mode allows users to optimize energy use during less busy times, contributing to reduced electricity bills and a lower carbon footprint.

The Hotpoint RSA 21 and RSAAV21P also boast a user-friendly digital display, which provides real-time information on temperature settings and alerts users to any potential issues. This technology aids users in managing their fridge's performance effectively, ensuring peace of mind regarding food storage conditions.

In addition to their practical attributes, these models come with a sleek and modern design, making them a stylish addition to any kitchen. The stainless-steel finish not only enhances aesthetic appeal but is also easy to clean and maintain, ensuring the appliance looks great over time.

Furthermore, both models include a variety of storage solutions such as door bins, transparent drawers, and dedicated compartments for fruits and vegetables, together enhancing accessibility and organization.

Overall, the Hotpoint RSA 21 and RSAAV21P stand as excellent choices in the landscape of refrigeration appliances, blending modern technology, efficiency, and design to meet the evolving needs of households today.
Top Page Image Contents