HP 1103530NR manual Downloading a Bios update, Windows 7-SelectStart Help and Support Maintain

BIOS version information (also known as ROM date and System BIOS) can be displayed by pressing fn+esc (if you are already in Windows) or by using Setup Utility.

1.Start Setup Utility.

2.Use a pointing device or the arrow keys to select File > System Information.

3.To exit Setup Utility without saving your changes, click the Exit icon in the lower-left corner of the screen, and then follow the on-screen instructions.

– or –

Use the tab key and the arrow keys to select File > Ignore Changes and Exit, and then press enter.

Downloading a BIOS update

CAUTION: To reduce the risk of damage to the computer or an unsuccessful installation, download and install a BIOS update only when the computer is connected to reliable external power using the AC adapter. Do not download or install a BIOS update while the computer is running on battery power, docked in an optional docking device, or connected to an optional power source. During the download and installation, follow these instructions:

Do not disconnect power from the computer by unplugging the power cord from the AC outlet.

Do not shut down the computer or initiate Sleep or Hibernation.

Do not insert, remove, connect, or disconnect any device, cable, or cord.

1.Windows 7—SelectStart > Help and Support > Maintain.

Windows XP—Select Start > Help and Support, and then select the software and drivers update.

2.Follow the on-screen instructions to identify your computer and access the BIOS update you want to download.

3.At the download area, follow these steps:

a.Identify the BIOS update that is later than the BIOS version currently installed on your computer. Make a note of the date, name, or other identifier. You may need this information to locate the update later, after it has been downloaded to your hard drive.

b.Follow the on-screen instructions to download your selection to the hard drive.

Make a note of the path to the location on your hard drive where the BIOS update is downloaded. You will need to access this path when you are ready to install the update.

NOTE: If you connect your computer to a network, consult the network administrator before installing any software updates, especially system BIOS updates.

BIOS installation procedures vary. Follow any instructions that are displayed on the screen after the download is complete. If no instructions are displayed, follow these steps:

1.Windows 7—Open Windows Explorer by selecting Start > Computer. Windows XP—Open Windows Explorer by selecting Start > My Computer.

2.Double-click your hard drive designation. The hard drive designation is typically Local Disk (C:).

Using Setup Utility 63