Manual duplex on heavy media or card stock

For heavy media, such as card stock, use the straight-through output path.

1Load the media, and open the straight-through output door.

2Access the printer properties (or printing preferences in Windows 2000 and XP). See Printer properties (driver) for instructions.

3On the Device Settings tab, select the option to allow manual duplexing.

4On the Finishing tab (the Paper Type/Quality tab for some Mac drivers), select the option to Print on Both Sides. Ensure that Straight Paper Path is checked.

5Print the document.

Note

Not all printer features are available from all drivers or operating systems. See the printer properties

 

(driver) online Help for information about availability of features for that driver.

 

 

6After side one has printed, remove the remaining paper from the input tray and set it aside until after you finish your manual duplexing job.

7Gather the printed pages, turn the printed side down, and straighten the stack before placing it back in the input tray. Side one should be facing down with the bottom edge feeding into the printer first.

Click OK (on screen), and wait for side two to print.

ENWW

Printing on both sides of the paper (manual duplexing) 41