Description | Spare part number |
|
|
RTC battery (includes cable and | |
|
|
Before removing the system board, follow these steps:
1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2.Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.Disconnect all external devices from the tablet.
4.Remove the back cover (see Back cover on page 38).
5.Remove the tablet battery (see Tablet battery on page 40).
Remove the RTC battery:
1.Disconnect the RTC battery cable (1) from the system board.
2.Detach the RTC battery (2) from the display assembly. (The RTC battery is attached to the display assembly with
3.Remove the system board.
Reverse this procedure to install the system board.
50 | Chapter 4 Removal and replacement preliminary requirements |