Remove the NFC module:

1.Release the audio/power connector board ZIF connector (1) to which the NFC module cable is attached, and then disconnect the NFC module cable from the audio/power connector board.

2.Release the NFC module ZIF connector (2) to which the NFC antenna cable is attached, and then disconnect the NFC antenna cable from the NFC module.

3.Detach the NFC module (3) from the display assembly. (The NFC module is attached to the display assembly with double-sided adhesive.)

4.Remove the NFC module and cable. Reverse this procedure to install the NFC module.

54

Chapter 4 Removal and replacement preliminary requirements

Page 62
Image 62
HP 13-h210dx x2, 13t-h200 x2, 13-h211nr x2 manual