Configuring the Switch

Changing PC’s IP Address

address to 192.168.2.x (where "x" can be any number from 1 to 255, except 10). If you are unfamiliar with this process, see “Changing PC’s IP Address” on page 3-2.

4.Open your Web browser and enter the address http://192.168.2.10. If your PC is properly configured, you will see the login page of your switch. If you do not see the login page, check your settings and repeat step 3.

5.There is no default password, just click the Login button to access the Web management interface.

6.From the menu, click SYSTEM, then IP Address. On the IP

Address page, enter the IP address, Subnet Mask and Gateway IP Address for the switch, then click on the APPLY button.

No other configuration changes are required at this stage, but it is

recommended that you configure an administrator password before logging out. From the menu, click SYSTEM, then Password. On the Password page, fill in all the fields before clicking on the APPLY

button.

Note If you cannot remember the switch's IP address or password, you can restore the factory default settings by following the procedure described in the "Troubleshooting" section.

Changing PC’s IP Address

To change the IP address of your PC:1.On Windows® XP, go to Start, Settings, Network and Dial-up Connections.

2.Right-click the connection icon of which the IP address you want to change, and then click properties.

3-2