Cables and Connectors

Cable and Connector Pin-Outs

N o t e

In the cable, each of the differential signal pairs (SDA and SDB, RDA

 

and RDB) and so on, must be twisted pairs of wire.

HP 5061-2557 Back-to-Back Test Cable for 62-Pin Connector—Minimum Pin-Outs

For a description of the use of this test cable, see page A-13 above. The WAN port on one router must have the Point to Point Address configured to DCE and the WAN port on the other router must have it configured to DTE. In addition, this router must have Clock Source configured to Internal, and the HP Router CR must have it configured to External.

For the pinouts of this cable, turn the page.

and Cables Connectors A

A-15