N o t e

Troubleshooting

Interpreting ERROR Messages on the HP AdvanceStack Router 200 SeriesInterpreting ERROR Messages on the HP AdvanceStack Router 200 Series

This section applies to the following routers:

HP Router PR

HP Router FR

HP Router TFR

General Procedure for Self-Test Failures

If the router has a hardware problem that prevents either normal operation or display of error conditions, then the problem is indicated by the appropriate LED patterns described in table 3-1, ‘‘LED Error Patterns During Initialization’’ on page 3-4. Otherwise, the console displays the appropriate error message along with instructions for further action:

7, MK5025 Test

ERROR: MK5025 failed interrupt test, errcode = 00000001

Error number

 

 

 

SELFTEST FAILURE

 

 

 

Error message

 

 

 

 

 

A hardware problem was detected while running selftest.

To enter the selftest monitor, press ‘s‘. To attempt to

Error procedure load operating code, press any other key.

If no key is pressed after 10 seconds, an attempt will be made to load operating code.

3-6