C a u t i o n
N o t e
Installation
Phase 3: Prepare the Router Hardware
C. Attach Network Cables
Depending on the model of router and the physical connections in your network, you will use one or more of the following interface options:
AUI (page
BNC (page
Token Ring (page
FDDI (page
WAN (page
Static discharge may damage equipment. Do not touch the router connector pins or the cable connector pins.
On routers providing an AUI interface and a BNC interface for the same LAN 802.3 port, you can use either interface at any time, but not both at the same time. For information on the operation of the green LEDs indicating AUI or BNC interface selection, refer to ‘‘AUI and BNC (green) LEDs’’ on page
Installation 1