![](/images/new-backgrounds/1153195/15319595x1.webp)
Removing the Switchboard PCA
NOTE: This section applies only to HP Pavilion 4x00, HP Compaq nx9005 and nx9000, Compaq Evo Notebook N1050v and N1010v, and Compaq Presario 2100 and 1100 models.
Required Equipment
1 Phillips screwdriver
Removal Procedure
1.Unplug the AC adapter, if present, and then remove the battery.
2.Remove the keyboard cover (page
3.Disconnect both the
4.Remove the M2.5×4.0mm screw that secures the keyboard, and then switchboard PCA to the top case (page
5.Gently lift up on the keyboard, carefully remove the switchboard PCA from the top case, and then disconnect the underside motherboard cable.
Figure 2-13. Removing the Switchboard PCA
HP Pavilion 4x00, HP Compaq nx9005 and nx9000,
Compaq Evo Notebook N1050v and N1010v,
and Compaq Presario 2100 and 1100 Models
Service Manual |