Choose ONE connection type a or B, Ethernet Wired Network | HP 2570

A! !B

15 Choose ONE connection type (A or B)

A USB! !.!

A: USB Connection - Do not connect yet

!

		!
		!USB!
!	!VTC!	!A!	!9!	!

Use this connection type if you want to connect the device directly to one computer. (Do not connect until the software instructs you to.)

Equipment needed: USB cable.

For a USB connection, go to Section A (page 9) for instructions.

B

B: Ethernet (Wired) Network

!	0	0
!		!B!	!11!	!

Use this connection type if you want an Ethernet cable connection between the device and your network.

Equipment needed: hub/router/switch and Ethernet cable.

For an Ethernet cable connection, go to Section B (page 11) for instructions.

!	!	!www! .hp.com/support!	!Photosmart 2570!	!
Network Setup!

Questions: For information on how to set up a network, go to www.hp.com/support, enter Photosmart 2570, and search for Network Setup.

8 • HP All-in-One

Image 8

HP 2570 manual Choose ONE connection type a or B, USB USB Connection Do not connect yet, Ethernet Wired Network

Contents

Remove all tape Locate components Lift color graphics display Attach the control panel faceplate if not attached Connect the power cord Load plain white paper Remove tape from both cartridges Open the access doorPress the On button Insert the tri-color print cartridge Insert the black print cartridge Align the print cartridges Turn on your computer USB USB Connection Do not connect yet Ethernet Wired NetworkChoose ONE connection type a or B Section a USB Connection Choose the correct CD Connect the USB cable Go to back of the guide to make a test copy Section B Ethernet wired network Connect the Ethernet cable Unblock! ! !accept Install software on additional computers Go to the last page to make a test copy HP All-in-One Windows CD 10x15 4x6 Print a test copy Q7211-90284