HP Photosmart 2570 !USB, Connect the USB cable, Go to back of the guide to make a test copy

1 16

Windows!

!USB!

!!USB!!

HP All-in-One!

! !USB! !

Windows Users:

aFollow the onscreen instructions until you see the prompt to connect the USB cable. (This may take several minutes.)

Once the prompt appears, connect the USB cable to the port on the back of the HP All-in-One, and then to any USB port on your computer.

bFollow the onscreen instructions. Complete the Sign up now screen.

Macintosh!

Macintosh Users:

aConnect the USB cable from your computer to the USB port on the back of the device.

bDouble-click the HP All-in-One Installer icon.

cMake sure you complete all screens, including the Setup Assistant.

10 • HP All-in-One

Contents

2 Remove all tape 3 Locate components Lift color graphics display Load plain white paper 7 Connect the power cord Press the On button 9 Open the access door 10Remove tape from both cartridges 11Insert the tri-colorprint cartridge 12Insert the black print cartridge 13Align the print cartridges 14Turn on your computer 15Choose ONE connection type (A or B) A USB A: USB Connection - Do not connect yet B: Ethernet (Wired) Network A! USB Section A: USB Connection !CD Choose the correct CD !USB Connect the USB cable Go to back of the guide to make a test copy Section B: Ethernet (wired) network Connect the Ethernet cable Continued Install software on additional computers Go to the last page to make a test copy Page Page Print a test copy