Chapter 4

When you have finished installing the software, your HP all-in-one is ready for service.

8To test your network connection, go to your computer and print a test page to your HP all-in-one. For more information, see the printed User Guide that came with yourHP all-in-one.

For Macintosh

The following instructions are for Macintosh computers only.

Note Installation time can range from 20 to 45 minutes depending on your operating system, the amount of available space, and the processor speed.

To install your HP all-in-one software

1Quit all applications running on your computer.

2Insert the Macintosh CD that came with your HP all-in-one into your computer's CD-ROM drive.

3Double-click the HP all-in-one installer icon.Macintosh installer icon

4On the Authentication screen, enter the Administrator pass phrase used to access your computer or network.

The installer software looks for HP all-in-one devices, and then lists them.

5On the Select Device, select your HP all-in-one.

6Follow the onscreen instructions to complete all the installation steps, including the Setup Assistant.

When you have finished installing the software, your HP all-in-one is ready for service.

7To test your network connection, go to your computer and print a test page to your HP all-in-one. For more information, see the printed User Guide that came with your device.

12