HP ProCurve Miscellaneous, Automatic, Parameter, Description, Not applicable, HP all-in-oneNetwork Guide

(continued)

●Automatic: AES or TKIP is in use.

●Not applicable: this parameter does not apply to this network type.

WEP aims to provide security by encrypting data over radio waves so that it is protected as it is transmitted from one end point to another. This security method is common on wireless networks.

Access Point HW	The hardware address of the access point on the network to which the
Address	HP all-in-one is connected:
	●	<MAC address>: the unique MAC (media access control) hardware
		address of the access point.
	●	Not applicable: this parameter does not apply to this network type.

Miscellaneous

The following table describes the data transmission and receipt information shown on the network configuration page.

Parameter	Description
Total Packets	The number of packets transmitted by the HP all-in-one without error since it
transmitted	has been turned on. The counter clears after the HP all-in-one is turned off.
	When a message is transmitted over a packet-switching network, it is broken
	up into packets. Each packet contains the destination address as well as the
	data.
Total Packets	The number of packets received by the HP all-in-one without error since it
received	has been turned on. The counter clears after the HP all-in-one is turned off.

HP all-in-one Network Guide 25